Applied data science in patient-centric healthcare: Adaptive analytic systems for empowering physicians and patients

We define the emerging research field of applied data science as the knowledge discovery process in which analytic systems are designed and evaluated to improve the daily practices of domain experts. We investigate adaptive analytic systems as a novel research perspective of the three intertwining aspects within the knowledge discovery process in healthcare: domain and data understanding for physician- and patient-centric healthcare, data preprocessing and modelling using natural language processing and (big) data analytic techniques, and model evaluation and knowledge deployment through information infrastructures. We align these knowledge discovery aspects with the design science research steps of problem investigation, treatment design, and treatment validation, respectively. We note that the adaptive component in healthcare system prototypes may translate to data-driven personalisation aspects including personalised medicine. We explore how applied data science for patient-centric healthcare can thus empower physicians and patients to more effectively and efficiently improve healthcare. We propose meta-algorithmic modelling as a solution-oriented design science research framework in alignment with the knowledge discovery process to address the three key dilemmas in the emerging “post-algorithmic era” of data science: depth versus breadth, selection versus configuration, and accuracy versus transparency.     

基于大数据的C语言程序设计

C语言作为一种程序设计语言,在大数据组成的物联网和云计算中应用广泛,具有强大的适应性和兼容性,是大数据时代下,在IT行业中起到关键作用的程序设计语言。文章分析了基于大数据的C语言程序设计的必然性和应用策略,为C语言在大数据上的应用方向提供了参考依据。以汉字的应用为例,提出了解决C语言应用问题的思路。     

航空发动机进气总温传感器测温误差研究

航空发动机进口总温测量的准确性是优化发动机控制率、保障发动机飞行安全的关键因素之一。针对影响传感器测量准确性的响应时间、恢复系数，通过空气动力学和热力学理论，分析出具体的影响因素，设计了多种结构模型，并通过热风洞试验、FloEFD软件建模和热流体仿真，从材料及结构上系统地提出了优化途径和改善办法并进行了验证，尤其是分析了双余度传感器的响应一致性误差并提出改善方法。研究结果为同类传感器的设计提供了参考和借鉴。     

Deploy Efficiency Driven k-Barrier Construction Scheme Based on Target Circle in Directional Sensor Network

Journal of Computer Science and Technology - With the increasing demand for security, building strong barrier coverage in directional sensor networks is important for effectively detecting...     

Development of LTCC micro-hotplate with PTC temperature sensor for gas-sensing applications

Low temperature co-fired ceramic (LTCC) micro-hotplates show wide applications in gas sensors and micro-fluidic devices. It is easily structured in three-dimensional structures. This paper presents the low power consumption micro-hotplates which were developed with PTC (positive temperature coefficient) temperature sensor and inter-digitated electrodes. The paper presents two different structures for micro-hotplate with platinum as a heating element. The PTC temperature sensor using two different materials viz. PdAg and platinum paste are developed with micro-hotplates. The simulation has been achieved through COMSOL for LTCC and alumina micro-hotplates. The temperature variation with power consumption has been measured for the developed LTCC micro-hotplates. The change in resistance of PTC temperature sensors was measured with micro-hotplate temperature. The aim of this study was to place a temperature sensor with the gas sensor module to measure and control the temperature of micro-hotplate. A SnO₂ sensing layer is coated on LTCC micro-hotplate using screen printing and characterized for the sensing of carbon monoxide gas (CO). This study will be beneficial for designing hotplates based on LTCC technology with low power consumption and better stability of temperature for gas-sensing applications.     

Environmentally friendly CsPbBr3 QDs multicomponent glass with super-stability for optoelectronic devices and up-converted lasing

Ultra-stable CsPbBr₃ perovskite quantum dots (QDs) multicomponent glass with high transmittance was prepared by melt-quenching heat treatment. The average diameter of the CsPbBr₃ QDs was ∼1.96 nm. The resulting glass displayed a high exciton binding energy of 362 ± 18 meV. Notably, these glass-encapsulated materials exhibited excellent resistance to heat, light, and water, superior to that of previously reported perovskite-based materials, and underwent an extremely low rate of Pb leaching during water immersion. Based on the glass, a high-performance white light-emitting diode (WLED) device was fabricated with Commission Internationale de L’Eclairage (CIE) coordinates of (0.3156, 0.3326) and color gamut of ∼113 % National Television Standards Committee (NTSC). The CsPbBr₃ QDs glass without rare earth elements further acted as an optical gain medium, realizing up-conversion lasing with 980-nm laser excitation for the first time. The reversible linear fluorescence response indicates that the glass could be a potential candidate for temperature sensors.     

数据驱动的机床等待过程节能方法研究

为了降低机床等待过程中的能耗，提出了一种实时数据驱动的机床等待时间预测与节能控制方法。首先，建立了射频识别驱动的生产进度评估方法，并以生产进度数据作为输入，构建了基于堆栈降噪自编码的机床等待时间预测模型；其次，依据预测的机床等待时间，提出了机床状态切换方法，以降低机床能耗；最后，通过一个电梯零部件制造车间的案例分析，表明该方法的预测误差仅为4.1%，同时将机床等待过程能耗降低了57%，实现了制造车间的节能减排。     

Extensive evaluation and classification of low-cost dust sensors in laboratory using a newly developed test method

An extensive evaluation of low-cost dust sensors was performed using an exponentially decaying particle concentration. A total of 264 sensors including 27 sensors with light-emitting diodes (LEDs) and 237 sensors with laser lighting sources were tested. Those tested sensors were classified into 4 groups based on the deviation from the reference data obtained by a reference instrument. The response linearities of all the tested samples for PM₁, PM_2.5, and PM₁₀ were in excellent agreement with the reference instrument, except a few samples. For the measurements of PM₁ and PM_2.5, the lighting source, that is, LED or laser, did not show any significant difference in overall sensor performance. However, LED-based sensors did not perform well for PM₁₀ measurements. The 32, 24, and 16% of all the tested sensors for PM₁, PM_2.5, and PM₁₀ measurement, respectively, are in the category of Class 1 (reference instrument reading ± 20%) requirement. The performance of the low-cost dust sensors for PM₁₀ measurement was relatively less satisfactory.     

The effect of traffic data source on deterioration rates of heavy-duty flexible pavements

The purpose of this study is to assess the effect of traffic data source (estimated vs. actual) on predicted progression rates of roughness and rutting for heavy-duty flexible pavements of rural freeways. Progression rates are predicted using calibrated HDM-4 models. The assessment is performed in terms of variations in maintenance intervention timing associated with the variations in progression rates. Time series pavement condition data (covering 3–5 years) have been collected for 7 sections of rural freeways for use in calibrating HDM-4 deterioration models. They range in length from 10 to 60.8 km and cover different traffic volumes, climate zones and subgrade soil types. For these sections, estimated annual average daily traffic (AADT), growth factors and assumed loading have been extracted from relevant database. Only six segments of these sections have Weigh-in-Motion (WIM) sites so relevant actual AADT, growth factors and axle load distributions have been extracted from WIM reports. The results of running the calibrated HDM-4 deterioration models using different traffic data show that actual traffic data from WIM sites result in higher rates of deterioration to that of estimated data for four sites, resulting in earlier intervention timing and higher present value agency cost. The other two sites have lower rates with actual data due to lower traffic loading than estimated.     

Data envelopment analysis based on team reasoning

Existing approaches to data envelopment analysis focus mainly on the derivation of the efficiency of the individual decision‐making unit (DMU) or on the calculation of the weights of multiple inputs or outputs, but pay little attention to the team interest of all the DMUs. Motivated by the idea of team reasoning, in which the benefit of the team is of higher importance than that of each individual, this paper considers all the DMUs as a team and introduces the team indexes including the overall efficiencies, variance, boundaries of all the DMUs, and relationships between DMUs. Several models are first developed to estimate values of the team indexes based on which decision makers can provide their preferences regarding them. Then, models are established to obtain the interval efficiencies of individual DMUs under the condition that the team indexes are satisfied. Several examples are given to illustrate the proposed approaches and verify their applicability.